Skip to content

Teaching Support Systems and Evaluation Systems

UGC NET Paper 1: traditional, modern and ICT-based teaching aids, Dale's cone, types of evaluation, test qualities, CBCS grading and computer-based testing.

  • 18 min read
  • Updated
On this page · 11 sections
  1. Prerequisites
  2. The Hook: Chalk, Slides, and a Marks Sheet
  3. Part A: Teaching Support Systems
  4. Part B: Evaluation Systems
  5. Memory Tricks
  6. Don’t Confuse
  7. Common Mistakes
  8. Practice
  9. Quick Revision Table
  10. Key Takeaways
  11. What’s Next

Prerequisites

The Hook: Chalk, Slides, and a Marks Sheet

How UGC NET asks it: classify aids (projected or non-projected; traditional or ICT), Dale’s cone order, formative vs summative vs diagnostic, norm- vs criterion-referenced, validity vs reliability, compute an SGPA, identify the features of CBCS and of computer-based testing, and pick “innovations in evaluation” from a list.


Part A: Teaching Support Systems

A teaching support system is everything that helps a teacher communicate and a learner learn beyond the teacher’s own voice: aids, materials, equipment and platforms. Good aids make learning concrete, interesting and lasting, save time, reach several senses, and support learners with different needs.

Three generations of support

TypeExamplesStrengthLimitation
TraditionalChalkboard/blackboard, textbooks, charts, maps, globes, models, specimens, flannel board, bulletin board, flash cards, real objectsCheap, simple, always available, no power neededStatic, limited to one room, slow to update
Modern (electronic, pre-internet)Overhead projector (OHP), slide and film-strip projectors, epidiascope, radio, tape recorder, television, film, video player, language laboratoryMotion and sound; large audiencesEquipment cost, mostly one-way
ICT-basedComputer and multimedia projector, interactive whiteboard (smart board), internet, learning management systems (e.g. Moodle, Google Classroom), video conferencing, e-books, simulations and virtual labs, MOOCs, mobile apps, AR/VR, AI toolsInteractive, individualised, updatable, anytime-anywhere, two-wayCost, connectivity, digital skills, digital divide, distraction

Other standard classifications

BasisCategoriesExamples
Sense usedAudioRadio, podcast, audio recording, language lab
VisualBlackboard, chart, map, model, slide, OHP transparency
Audio-visualTelevision, film, video, multimedia presentation
ProjectionProjectedOHP, slide projector, film, LCD/multimedia projector, epidiascope
Non-projectedBlackboard, chart, model, map, globe, flannel board, specimen
Educational technology approachHardware approachMachines and equipment: projectors, computers, TV
Software approachLearning principles and materials: programmed instruction, instructional design, lesson content
Systems approachPlans the whole instructional system (input, process, output, feedback)

Edgar Dale’s Cone of Experience

Edgar Dale, in Audio-Visual Methods in Teaching (1946), arranged learning experiences in a cone from the most concrete at the base to the most abstract at the top.

graph BT
    A["Direct, purposeful experiences (base: most concrete)"] --> B["Contrived experiences (models, mock-ups)"]
    B --> C["Dramatised experiences"]
    C --> D["Demonstrations"]
    D --> E["Field trips, exhibits"]
    E --> F["Television, motion pictures"]
    F --> G["Recordings, radio, still pictures"]
    G --> H["Visual symbols"]
    H --> I["Verbal symbols (top: most abstract)"]

The bands above are simplified: Dale’s editions (1946, 1954, 1969) differ slightly in how many bands they show and what they call them (field trips and exhibits are separate bands; television was added in the 1954 edition). The base, the top and the concrete-to-abstract order are the same in all of them.

  • Base: direct, purposeful experience. Top: verbal symbols (words).
  • Moving up the cone, experiences become more abstract; moving down, more concrete. The cone is a visual model, not a ranking of value: abstract verbal teaching is efficient once learners have enough concrete experience to understand the words.

ICT-based support in Indian higher education

ResourceWhat it offers
SWAYAM, SWAYAM Prabha, NPTEL, e-PG PathshalaCourses and e-content (see Methods: offline vs online)
Shodhganga (INFLIBNET)Repository of Indian PhD theses; deposit was mandated by UGC’s 2009 PhD regulations
National Digital Library of IndiaSingle-window search of digital resources (IIT Kharagpur)
Virtual Labs, Spoken TutorialSimulated experiments; tutorials on open-source software
Open Educational Resources (OER)Teaching material free to use, adapt and share; the term was adopted at a UNESCO forum in 2002; often licensed under Creative Commons
Learning Management System (LMS)Courses, assignments, quizzes, gradebook, forums in one place

Choosing an aid: match the aid to the objective, learners and class size; prepare and test it in advance; keep it simple and visible; use it at the right moment and remove it after; make it accessible (captions, readable fonts, alt text). An aid supports teaching; it never replaces the teacher’s planning.


Part B: Evaluation Systems

Measurement, assessment, evaluation

TermMeaningNature
MeasurementAssigning numbers to a trait (“scored 42 out of 50”)Quantitative, limited
AssessmentCollecting and interpreting evidence about learning, often to improve itProcess-focused, ongoing
EvaluationJudging the worth of learning against objectives, using measurement and other evidenceComprehensive, includes value judgement

A widely used formulation (from N.E. Gronlund’s work on measurement and evaluation): Evaluation = quantitative description (measurement) and/or qualitative description (non-measurement) + value judgement.

Elements of evaluation

The evaluation triangle, associated with Bloom, links three elements: educational objectives → learning experiences → evaluation (change in behaviour). Each points to the other two: objectives decide experiences and evaluation; evaluation shows whether objectives were met and how experiences should change.

A complete evaluation system also needs: clear objectives, valid and reliable tools, criteria and standards, data collection, interpretation and judgement, and feedback to learners and teachers.

Types of evaluation

By function and timing:

TypeWhenPurposeExample
PlacementBefore instructionFind entry level; place the learnerEntrance or bridge-course test
FormativeDuring instructionImprove learning and teaching; feedbackWeekly quizzes, assignments, class questions
DiagnosticDuring, when difficulties persistIdentify causes of learning difficulty for remedial teachingError analysis test
SummativeAt the endCertify, grade, judge overall achievementEnd-semester exam

The terms formative and summative were introduced by Michael Scriven (1967) for curriculum evaluation; Bloom, Hastings and Madaus (1971) applied them to student learning.

By reference point:

TypeCompares a learner withUse
Norm-referencedOther learners (rank, percentile)Selection, competitive exams; UGC NET reports a percentile score alongside marks
Criterion-referencedA fixed standard of masteryMastery learning, licensing, pass/fail on objectives
IpsativeThe learner’s own earlier performanceTracking personal progress

The term criterion-referenced measurement is credited to Robert Glaser (1963).

Other pairs: internal vs external; continuous vs terminal; oral, written and practical; self-assessment and peer assessment; assessment of learning (summative), for learning (formative) and as learning (learners monitoring themselves).

Continuous and Comprehensive Evaluation (CCE): continuous = regular formative plus summative; comprehensive = scholastic plus co-scholastic areas. The Right to Education Act, 2009 (Section 29) required CCE in elementary education.

Qualities of a good evaluation tool

QualityMeaningKinds / notes
ValidityMeasures what it claims to measureContent, construct, criterion-related (concurrent and predictive), face validity
ReliabilityConsistency of scoresTest–retest, parallel/equivalent forms, split-half (corrected by Spearman–Brown), internal consistency (Kuder–Richardson, Cronbach’s alpha)
ObjectivityScore does not depend on who marks itObjective items are highest; essays lowest
Usability (practicability)Easy to administer, score and interpret; economical
DiscriminationSeparates high and low achieversItem analysis
Comprehensiveness / adequacyCovers the content and objectives sufficientlyBlueprint (table of specifications)

Item analysis

For each objective item, compare the upper and lower groups (commonly the top and bottom 27% of scorers).

  • Difficulty index: \( P = \frac{R_U + R_L}{N} \), where \( R_U \) and \( R_L \) are correct answers in the upper and lower groups and \( N \) is the total number in both groups. A higher P means an easier item.
  • Discrimination index: \( D = \frac{R_U - R_L}{N/2} \). It ranges from \(-1\) to \(+1\); a negative D means weaker students did better on the item, so the item is faulty.

Worked example: 40 students in the two groups (20 each); 16 in the upper and 6 in the lower group answer correctly. \( P = \frac{16 + 6}{40} = 0.55 \) (moderate difficulty) and \( D = \frac{16 - 6}{20} = 0.5 \) (discriminates well).

Tools and techniques of evaluation

ToolBest for
Essay-type testOrganisation, expression, higher-order thinking; low objectivity, limited coverage
Short-answer testWider coverage than essays, moderate objectivity
Objective test (MCQ, true/false, matching, completion)Wide coverage, high objectivity and reliability; guessing possible
Rating scaleDegree of a trait (e.g. 1–5)
ChecklistPresence or absence of a behaviour (yes/no)
Anecdotal recordBrief factual notes of significant incidents
Cumulative recordA learner’s progress over years
RubricCriteria with performance levels for projects, presentations
PortfolioCollection of a learner’s work showing growth
Observation, interview, questionnaireBehaviour, attitudes, opinions
Sociometry (J.L. Moreno)Social relationships within a group (sociogram)

Evaluation in the Choice Based Credit System (CBCS)

UGC issued guidelines for CBCS in 2015, for implementation from the 2015–16 session. The aim: student choice, mobility, uniform grading and credit transfer.

FeatureDetail
Semester systemLearning and evaluation by semester
Credit1 credit = 1 hour of lecture or tutorial per week, or 2 hours of practical/field work per week, in a semester
Course typesCore; Elective (Discipline Specific Elective, Generic Elective from another discipline, Project/Dissertation); Ability Enhancement (Compulsory: Environmental Science and English/MIL communication; Skill Enhancement Courses)
EvaluationContinuous internal assessment plus end-semester examination
GradingLetter grades on a 10-point scale, reported as SGPA and CGPA
MobilityCredits earned can be transferred; later reinforced by the Academic Bank of Credits (UGC regulations, 2021) and SWAYAM credit transfer

UGC’s 10-point grading scale (CBCS guidelines):

Letter gradeMeaningGrade point
OOutstanding10
A+Excellent9
AVery Good8
B+Good7
BAbove Average6
CAverage5
PPass4
FFail0
AbAbsent0

Computing SGPA and CGPA:

  • SGPA \( = \frac{\sum (C_i \times G_i)}{\sum C_i} \), where \( C_i \) is the credits of the i-th course and \( G_i \) its grade point.
  • CGPA \( = \frac{\sum (C_i \times S_i)}{\sum C_i} \), where \( S_i \) is the SGPA of the i-th semester and \( C_i \) the total credits of that semester.

Worked example (the SGPA in the hook): four courses with credits 4, 4, 3, 3 and grades A (8), B+ (7), O (10), B (6). \( \sum C_i G_i = 32 + 28 + 30 + 18 = 108 \); \( \sum C_i = 14 \); SGPA \( = \frac{108}{14} \approx 7.71 \).

Computer-based testing (CBT)

In a CBT, questions appear on a computer screen and the candidate answers on the computer. UGC NET itself is a CBT: per the December 2026 information bulletin, the exam is in Computer Based Test mode only, objective multiple-choice, answers by mouse click, and when a subject runs over several shifts, marks are normalised by the equi-percentile method.

FeatureBenefit
Item banksMany parallel questions; different sets for different shifts
Randomised order of questions and optionsReduces copying
Automated scoringFast, error-free results
Question palette, mark-for-reviewCandidate can navigate and revise
Secure deliveryEncrypted papers, biometric checks, CCTV
Data for analysisItem statistics, time spent per item

Kinds: linear CBT (same fixed set, as in UGC NET) vs computer-adaptive testing (CAT), where the next question’s difficulty depends on the previous answers, based on item response theory. Also internet-based tests and remotely proctored online exams.

Limitations: needs infrastructure and power; unfamiliar for some candidates; technical glitches; mainly suits objective items; screen fatigue.

Innovations in evaluation

  • Continuous internal assessment and CCE in place of a single final exam
  • Grading (CGPA) in place of raw marks; credit transfer and the Academic Bank of Credits
  • Open-book and take-home examinations, testing application rather than recall
  • On-demand and online examinations; question banks
  • Rubrics, portfolios and e-portfolios; project and practical work
  • Self-assessment and peer assessment; 360-degree feedback
  • Competency- and outcome-based assessment, aligned with learning outcomes
  • Digital (on-screen) evaluation of scanned answer scripts
  • AI-assisted proctoring, automated scoring and learning analytics
  • Digital certificates stored in DigiLocker and the National Academic Depository
  • Transparency: access to evaluated answer sheets; the Supreme Court held in CBSE v. Aditya Bandopadhyay (2011) that evaluated answer books are “information” under the RTI Act
  • Student feedback on teaching and courses

Memory Tricks

Don’t Confuse

ThisvsThat
Formative: during, to improvevsSummative: at end, to certify
Diagnostic: finds causes of difficultyvsFormative: monitors progress
Norm-referenced: compared with othersvsCriterion-referenced: compared with a standard (Glaser, 1963)
Validity: measures the right thingvsReliability: measures consistently
Rating scale: degree of a traitvsChecklist: present or absent
Projected aids: OHP, LCD projectorvsNon-projected aids: blackboard, chart, model
Hardware approach: machinesvsSoftware approach: learning materials and principles
Dale’s cone base: direct experiencevsDale’s cone top: verbal symbols
SGPA: one semestervsCGPA: all semesters so far
Linear CBT: fixed setvsComputer-adaptive test: difficulty adapts

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET style. They are not previous-year questions.

Level 1: Foundation

Practice 1.1. Who introduced the terms formative and summative evaluation, and in which year?

Practice 1.2. In the UGC 10-point grading scale, what grade point does “A+” carry?

Practice 1.3. What is at the base of Dale’s Cone of Experience?

Answers
  1. Michael Scriven, 1967 (for curriculum evaluation).
  2. 9 (Excellent).
  3. Direct, purposeful experiences, the most concrete.

Level 2: Exam-style MCQs

Practice 2.1. A student earns grades O, A, B+ and C in four courses of 4, 4, 2 and 2 credits respectively. Her SGPA is:

(1) 7.50 (2) 8.00 (3) 8.33 (4) 8.50

Answer and explanation

(2) 8.00. \( \sum C_i G_i = 4(10) + 4(8) + 2(7) + 2(5) = 40 + 32 + 14 + 10 = 96 \); \( \sum C_i = 4 + 4 + 2 + 2 = 12 \); SGPA \( = \frac{96}{12} = 8.00 \). Option (1), 7.50, is the plain average of the four grade points \( \frac{10 + 8 + 7 + 5}{4} \); SGPA must be weighted by credits.

Practice 2.2. Which of the following are non-projected teaching aids?

A. Flannel board B. Overhead projector C. Globe D. Epidiascope E. Chart

Choose the correct answer from the options given below:

(1) A, C and E only (2) A, B and C only (3) B, D and E only (4) C, D and E only

Answer and explanation

(1) A, C and E only. The overhead projector and epidiascope throw an image onto a screen, so they are projected aids.

Practice 2.3. A teacher finds that a test gives almost the same scores when repeated after two weeks, but the scores do not match students’ actual laboratory skill. The test is:

(1) Valid and reliable (2) Reliable but not valid (3) Valid but not reliable (4) Neither valid nor reliable

Answer and explanation

(2) Reliable but not valid. Consistent scores show test–retest reliability; failure to reflect the skill it should measure shows lack of validity.

Practice 2.4. Which of the following statements about computer-based testing are correct?

A. Question and option order can be randomised. B. In a computer-adaptive test, the difficulty of later items depends on earlier responses. C. CBT eliminates the need for valid and reliable test items. D. Automated scoring allows faster results.

(1) A, B and D only (2) A, C and D only (3) B and C only (4) A, B, C and D

Answer and explanation

(1) A, B and D only. CBT changes delivery and scoring, not the need for good items; validity and reliability still depend on item quality.

Level 3: Assertion–reason, match and sequence

Practice 3.1 (Assertion–reason). Given below are two statements:

Assertion (A): Formative evaluation is more useful than summative evaluation for improving teaching during a course. Reason (R): Formative evaluation is carried out at the end of a course to certify achievement.

(1) Both (A) and (R) are true and (R) is the correct explanation of (A) (2) Both (A) and (R) are true but (R) is NOT the correct explanation of (A) (3) (A) is true but (R) is false (4) (A) is false but (R) is true

Answer and explanation

(3). A is true: formative evaluation gives feedback while there is still time to act. R describes summative evaluation, so it is false.

Practice 3.2 (Match the following).

List I (Concept)List II (Associated with)
A. Cone of ExperienceI. Robert Glaser
B. Criterion-referenced measurementII. Edgar Dale
C. Formative and summative evaluationIII. J.L. Moreno
D. SociometryIV. Michael Scriven

(1) A-II, B-I, C-IV, D-III (2) A-II, B-IV, C-I, D-III (3) A-III, B-I, C-IV, D-II (4) A-II, B-III, C-IV, D-I

Answer and explanation

(1) A-II, B-I, C-IV, D-III. Dale (1946); Glaser (1963); Scriven (1967); Moreno’s sociometry.

Practice 3.3 (Sequence). Arrange these experiences of Dale’s Cone from most concrete to most abstract:

A. Verbal symbols B. Demonstrations C. Direct, purposeful experiences D. Visual symbols E. Contrived experiences

(1) C, E, B, D, A (2) C, B, E, D, A (3) E, C, B, A, D (4) C, E, D, B, A

Answer and explanation

(1) C, E, B, D, A. Direct experience → contrived experience → demonstration → visual symbols → verbal symbols.

Practice 3.4 (Sequence). Arrange the types of evaluation in the order they are normally used in a course:

A. Summative B. Placement C. Formative D. Diagnostic

(1) B, C, D, A (2) C, B, D, A (3) B, D, C, A (4) D, B, C, A

Answer and explanation

(1) B, C, D, A. Placement before teaching; formative during; diagnostic when formative checks reveal persistent difficulties; summative at the end.


Quick Revision Table

ItemKey fact
Traditional aidsBlackboard, textbook, chart, map, model, specimen
Modern aidsOHP, slide/film projector, radio, TV, film, language lab
ICT aidsSmart board, LMS, MOOCs, video conferencing, simulations, AR/VR, AI
Projected / non-projectedOHP, LCD, epidiascope / blackboard, chart, model, globe
Dale’s cone1946; base direct experience, top verbal symbols; percentages not Dale’s
ET approachesHardware, software, systems
EvaluationMeasurement + qualitative description + value judgement
Evaluation triangleObjectives, learning experiences, evaluation
Placement / formative / diagnostic / summativeBefore / during / persistent difficulty / end
Formative and summativeScriven, 1967; Bloom, Hastings and Madaus, 1971
Criterion-referencedGlaser, 1963
Validity typesContent, construct, criterion (concurrent, predictive), face
Reliability typesTest–retest, parallel forms, split-half, internal consistency
Item analysis\( P = \frac{R_U + R_L}{N} \); \( D = \frac{R_U - R_L}{N/2} \); top and bottom 27%
CBCSUGC 2015; 1 credit = 1 h lecture or 2 h practical per week; 10-point scale O to F
SGPA / CGPACredit-weighted mean of grade points / of SGPAs
CBTUGC NET is CBT only; normalisation by equi-percentile method (Dec 2026 bulletin)
CATAdaptive; item response theory

Key Takeaways

What’s Next

Advertisement
Advertisement