Skip to content

Human Resource Management: Planning, Recruitment, Training and Succession

UGC NET Commerce: concept, role and functions of HRM, HR planning, job analysis, recruitment and selection, training and development, succession planning.

  • 16 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: The Branch Manager Who Retired on a Friday
  3. 1. Concept of HRM
  4. 2. Role and Functions of HRM
  5. 3. Human Resource Planning (HRP)
  6. 4. Recruitment
  7. 5. Selection
  8. 6. Training and Development
  9. 7. Succession Planning
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

This page covers the official line “Human resource management: concept, role and functions of HRM; human resource planning; recruitment and selection; training and development; succession planning”.

The Hook: The Branch Manager Who Retired on a Friday


1. Concept of HRM

Human resource management is the management of people at work: acquiring, developing, rewarding, maintaining and, when needed, separating them, so that individual, organisational and social objectives are achieved.

Edwin B. Flippo’s classic definition (of personnel management) describes it as the planning, organising, directing and controlling of the procurement, development, compensation, integration, maintenance and separation of human resources, so that individual, organisational and societal objectives are met. The definition contains both kinds of function in the table below.

Personnel management and HRM

BasisPersonnel managementHuman resource management
View of peopleA cost to be controlledAn asset to be developed
NatureAdministrative, routine, reactiveStrategic, proactive
FocusRules, procedures, complianceCommitment, performance, culture
ResponsibilityPersonnel departmentLine managers as well as HR
PayJob evaluation, fixed gradesPerformance-linked, flexible
RelationsCollective, through unionsIndividual, through communication and involvement

Hard vs soft HRM: hard HRM (associated with the Michigan model) treats people as a resource to be used efficiently in line with strategy; soft HRM (associated with the Harvard model) stresses commitment, communication and development.

Models of HRM

ModelAuthors, yearCore idea
Michigan (matching) modelFombrun, Tichy and Devanna, 1984HR systems must fit strategy and structure; the human resource cycle: selection → performance → appraisal → rewards → development
Harvard modelBeer, Spector, Lawrence, Mills and Walton, Managing Human Assets, 1984Stakeholder interests and situational factors shape HR policies, which produce the four Cs: commitment, competence, congruence, cost-effectiveness
Guest modelDavid Guest, 1987HR policies aimed at commitment, quality, flexibility and strategic integration

Strategic HRM (SHRM) links HR policies to the organisation’s strategy, so that people practices support competitive advantage.


2. Role and Functions of HRM

Ulrich’s four roles

Dave Ulrich (Human Resource Champions, 1997) described four roles along two axes: strategic vs operational focus and processes vs people:

ProcessesPeople
Strategic (future)Strategic partnerChange agent
Operational (day to day)Administrative expertEmployee champion

Functions of HRM

Managerial functionsOperative functions
PlanningProcurement: job analysis, HRP, recruitment, selection, placement, induction
OrganisingDevelopment: training, executive development, career and succession planning
DirectingCompensation: job evaluation, wage and salary administration, incentives, benefits
ControllingIntegration: motivation, grievances, discipline, collective bargaining, participation
Maintenance: health, safety, welfare, social security
Separation: retirement, resignation, layoff, retrenchment, dismissal

3. Human Resource Planning (HRP)

HRP (manpower planning) is the process of getting the right number of people with the right skills in the right jobs at the right time. Eric Vetter described it as the process by which management decides how the organisation should move from its current manpower position to its desired manpower position.

The HRP process

graph TD
    A["1. Analyse organisational objectives and plans"] --> B["2. Forecast demand for human resources"]
    B --> C["3. Forecast supply
(internal and external)"] C --> D["4. Estimate the gap
(demand minus supply)"] D --> E["5. Action plans
Surplus: freeze, VRS, redeployment
Shortage: recruit, train, promote, overtime"] E --> F["6. Monitor, control and review"]

Forecasting techniques

Demand forecastingSupply forecasting
Managerial judgement (top-down or bottom-up)Skills inventory (non-managerial) and management inventory
Delphi technique: anonymous expert rounds until consensusReplacement charts
Work-study / workload analysis: standard hours ÷ hours per workerMarkov analysis: transition probabilities of staying, moving, leaving
Ratio-trend analysis: ratios such as workers per unit of outputSuccession planning
Regression and econometric modelsLabour turnover and absenteeism analysis; external labour market

Labour turnover

$$ \text{Separation rate} = \frac{\text{Separations during the period}}{\text{Average number of employees}} \times 100 $$$$ \text{Replacement rate} = \frac{\text{Employees replaced}}{\text{Average number of employees}} \times 100 $$

Job analysis

Job analysis is the systematic study of a job to find out its duties and the qualities needed to do it. It produces two documents:

Job descriptionJob specification
About the job: title, duties, responsibilities, working conditions, reporting relationshipsAbout the person: qualifications, skills, experience, physical and mental traits
“What the job is”“Who can do it”

Methods of job analysis: observation, interview, questionnaire (including the Position Analysis Questionnaire, PAQ), checklist, critical incident technique, work diary or log, and functional job analysis.

Job analysis feeds HRP, recruitment, selection, training, job evaluation and performance appraisal. Job design approaches built on it: job simplification, job rotation (moving between jobs), job enlargement (horizontal loading: more tasks at the same level) and job enrichment (vertical loading: more responsibility and control, from Herzberg).


4. Recruitment

Recruitment is the process of searching for prospective employees and stimulating them to apply for jobs (Flippo). It creates a pool of applicants and is called a positive process; selection, which rejects most of that pool, is called a negative process.

Internal sourcesExternal sources
PromotionAdvertisement (press, online job portals)
TransferCampus recruitment
Employee referralsEmployment exchanges
Former employees (rehiring, boomerangs)Placement agencies and executive search (“head-hunting”)
Internal job postingWalk-ins, gate hiring, labour contractors
Social media and e-recruitment
Internal recruitmentExternal recruitment
Motivates staff, cheaper, fasterNew ideas and skills, wider choice
Known candidate, less riskHigher cost and time, induction needed
Limits choice, “inbreeding”Can demoralise existing staff

Recruitment yield ratio: the proportion of applicants who move from one stage to the next, used to plan how many applicants are needed.


5. Selection

Selection is the process of choosing the most suitable candidates from those who applied. The usual steps:

graph LR
    A["Preliminary
screening"] --> B["Application
blank"] B --> C["Selection
tests"] C --> D["Interview"] D --> E["Reference and
background check"] E --> F["Medical
examination"] F --> G["Final decision
and job offer"] G --> H["Placement and
induction"]

Each step can reject a candidate, which is why selection is often described as a series of successive hurdles.

Selection tests

TestMeasures
IntelligenceGeneral mental ability
AptitudePotential to learn a skill
Achievement / tradeSkill already acquired
PersonalityTraits such as sociability, stability (for example, Big Five instruments)
InterestPreferences for kinds of work
ProjectiveHidden motives through ambiguous stimuli: Thematic Apperception Test (TAT), Rorschach inkblot
SituationalBehaviour in simulated job situations: in-basket exercise, leaderless group discussion

A good test is reliable (gives consistent results on repetition) and valid (measures what it claims to measure and predicts job performance). A test can be reliable without being valid, but not valid without being reliable.

Interviews

TypeFeature
Structured (patterned)Pre-set questions asked of all candidates
UnstructuredFree-flowing conversation
StressDeliberate pressure to see how the candidate copes
Panel / boardSeveral interviewers together
Behavioural“Tell us about a time when you…” (past behaviour)
Situational“What would you do if…” (hypothetical)

Interview errors: halo effect (one good trait colours the whole judgement), horn effect (the reverse), first impression, similar-to-me bias, contrast effect, and stereotyping.

Selection ratio \( = \) number selected \( \div \) number of applicants. A low ratio means the firm can be choosy.

Placement puts the selected person in the job for which he was chosen. Induction (orientation) introduces the new employee to the organisation, its people, policies and culture; socialisation is the longer process by which he absorbs its norms.


6. Training and Development

BasisTrainingDevelopment
PurposeSkills for the present jobGrowth for future roles
ForMainly operatives and staffMainly managers and executives
FocusTechnical, job-specificConceptual, human, career
Time frameShort termLong term
InitiativeOrganisationLargely the individual, with organisational support

Education is broader still: general knowledge and understanding, not tied to a job.

Training needs analysis (TNA)

McGehee and Thayer (1961) proposed analysis at three levels:

LevelQuestion
Organisational analysisWhere in the organisation is training needed?
Task (operations) analysisWhat must be taught for the job?
Person (individual) analysisWho needs training, and in what?

A training gap is the difference between the required and the actual level of performance or competence. The common design model is ADDIE: Analysis, Design, Development, Implementation, Evaluation.

Methods

On-the-jobOff-the-job
Job instruction training (JIT)Lectures and conferences
CoachingVestibule training: a replica of the work setting away from the floor
MentoringCase study
Job rotationRole playing
ApprenticeshipIn-basket exercise
UnderstudyBusiness (management) games and simulation
InternshipSensitivity training (T-group / laboratory training)
Programmed instruction and e-learning

Sensitivity training brings a small, unstructured group together to increase awareness of one’s own behaviour and its effect on others. It grew out of the T-group work of Kurt Lewin’s associates at the National Training Laboratories in the late 1940s. It is used both for management development and as an organisational development intervention.

Evaluating training: Kirkpatrick’s four levels

Donald Kirkpatrick proposed four levels of training evaluation (1959):

LevelMeasuresTypical tool
1. ReactionDid trainees like it?Feedback forms (“happy sheets”)
2. LearningDid they learn?Tests before and after
3. BehaviourDo they apply it on the job?Observation, supervisor ratings
4. ResultsDid the organisation benefit?Output, quality, cost, sales

Jack Phillips later added a fifth level, return on investment (ROI).


7. Succession Planning

Succession planning identifies and develops people to fill key positions when they fall vacant through retirement, resignation, promotion or death. It is the link between HRP and management development.

Steps

  1. Identify key (critical) positions.
  2. Define the competencies each position needs.
  3. Assess the performance and potential of possible successors (often on a nine-box grid of performance against potential).
  4. Identify successors and their readiness (“ready now”, “ready in one to two years”).
  5. Prepare individual development plans: job rotation, mentoring, stretch assignments, training.
  6. Review the plan regularly.
ConceptScopeTime frame
Replacement planningNames a stand-in for a specific post, often in an emergencyShort term, reactive
Succession planningBuilds a pipeline of ready successors for key postsLong term, proactive
Career planningThe individual’s progression through the organisationEmployee-centred
Talent managementAttracting, developing and retaining high-potential people across the organisationOrganisation-wide

A replacement chart shows each key position, the incumbent, and possible successors with their present performance and promotability.

Career planning matches individual aspirations with organisational opportunities. Edgar Schein described career anchors, the self-concept that guides a person’s career choices: technical/functional competence, general managerial competence, autonomy/independence, security/stability, entrepreneurial creativity, service/dedication to a cause, pure challenge, and lifestyle.


Memory Tricks

Don’t Confuse

PairFirstSecond
Job description vs job specificationThe job (duties)The person (qualifications)
Recruitment vs selectionPositive: attract applicantsNegative: choose and reject
Reliability vs validityConsistencyAccuracy: measures what it claims
Training vs developmentPresent job, skills, short termFuture roles, growth, long term
Job enlargement vs job enrichmentHorizontal: more tasksVertical: more responsibility
Vestibule vs on-the-job trainingA replica, away from the floorAt the actual workplace
Succession vs replacement planningLong-term pipelineShort-term stand-in
Michigan vs Harvard modelHard HRM, fit with strategySoft HRM, stakeholders, four Cs
Skills inventory vs replacement chartData on employees’ skillsSuccessors for specific positions

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET format. They are not previous-year questions.

Level 1: Foundation

  1. Which document records the qualifications required of a jobholder?
  2. Name Kirkpatrick’s four levels of training evaluation.
  3. Is Markov analysis used to forecast demand or supply of human resources?
Answers
  1. The job specification.
  2. Reaction, learning, behaviour, results.
  3. Internal supply.

Level 2: Exam-style MCQs

Q1. (Practice) A firm had 760 employees at the start of a year and 840 at the end. During the year 48 employees left. The separation rate is:

  • (a) 5.71%
  • (b) 6.32%
  • (c) 6.00%
  • (d) 5.00%
Answer and explanation

(c) 6.00%. Average \( = (760 + 840) \div 2 = 800 \). Rate \( = 48 \div 800 \times 100 = 6\% \). Option (a) uses the closing figure (\( 48 \div 840 \)); option (b) uses the opening figure (\( 48 \div 760 \)).

Q2. (Practice) Which of the following is an off-the-job training method?

  • (a) Coaching
  • (b) Job rotation
  • (c) Vestibule training
  • (d) Understudy
Answer and explanation

(c) Vestibule training, which uses a replica of the workplace away from the production floor.

Q3. (Practice) The four Cs (commitment, competence, congruence, cost-effectiveness) are the outcomes in the:

  • (a) Michigan model
  • (b) Harvard model
  • (c) Guest model
  • (d) Ulrich model
Answer and explanation

(b) Harvard model (Beer and colleagues, 1984).

Q4. (Practice) Consider the following statements:

  1. Job enrichment involves vertical loading of a job.
  2. A selection test that is reliable is necessarily valid.
  3. Succession planning focuses on key positions in the organisation.

Which of the statements given above is/are correct?

  • (a) 1 and 2 only
  • (b) 1 and 3 only
  • (c) 2 and 3 only
  • (d) 1, 2 and 3
Answer and explanation

(b) 1 and 3 only. A test can give consistent results while measuring the wrong thing, so reliability does not guarantee validity.

Level 3: Assertion–reason, match and sequence

For assertion–reason questions, use these options:

  • (a) Both A and R are true, and R is the correct explanation of A
  • (b) Both A and R are true, but R is not the correct explanation of A
  • (c) A is true, but R is false
  • (d) A is false, but R is true

Q1. (Practice) Assertion (A): Recruitment is called a positive process. Reason (R): Recruitment aims to attract as many suitable applicants as possible to apply.

Answer and explanation

(a). It is positive precisely because it seeks to enlarge the applicant pool; selection then narrows it.

Q2. (Practice) Assertion (A): Internal recruitment always brings fresh ideas into the organisation. Reason (R): Promotion from within can motivate existing employees.

Answer and explanation

(d). A is false: fresh ideas are an advantage of external recruitment, and internal recruitment risks “inbreeding”. R is true.

Q3. (Practice) Match List I (Concept) with List II (Associated name).

List IList II
A. Four levels of training evaluationI. Dave Ulrich
B. Three-level training needs analysisII. Edgar Schein
C. Four HR rolesIII. Donald Kirkpatrick
D. Career anchorsIV. McGehee and Thayer
  • (1) A-III, B-IV, C-I, D-II
  • (2) A-IV, B-III, C-I, D-II
  • (3) A-III, B-I, C-IV, D-II
  • (4) A-III, B-IV, C-II, D-I
Answer and explanation

(1) A-III, B-IV, C-I, D-II.

Q4. (Practice) Arrange the steps of the selection process in the usual order:

  • A. Medical examination

  • B. Selection tests

  • C. Preliminary screening

  • D. Interview

  • E. Job offer

  • (1) C, B, D, A, E

  • (2) C, D, B, A, E

  • (3) B, C, D, A, E

  • (4) C, B, A, D, E

Answer and explanation

(1) C, B, D, A, E. Screening, tests, interview, (references), medical examination, then the offer.

Q5. (Practice) Arrange the steps of human resource planning in order:

  • A. Forecasting supply

  • B. Analysing organisational objectives

  • C. Estimating the manpower gap

  • D. Forecasting demand

  • E. Formulating action plans

  • (1) B, D, A, C, E

  • (2) B, A, D, C, E

  • (3) D, B, A, C, E

  • (4) B, D, C, A, E

Answer and explanation

(1) B, D, A, C, E.


Quick Revision Table

ItemKey fact
FlippoManagerial (POSDC-type) + operative functions: procurement, development, compensation, integration, maintenance, separation
Ulrich (1997)Strategic partner, administrative expert, employee champion, change agent
Michigan (1984)Fombrun, Tichy, Devanna; HR cycle; hard HRM
Harvard (1984)Beer et al.; four Cs; soft HRM
HRPObjectives → demand → supply → gap → action → review
Demand techniquesJudgement, Delphi, work-study, ratio-trend, regression
Supply techniquesSkills inventory, replacement chart, Markov analysis, succession plan
TurnoverSeparations ÷ average employees × 100
Job description / specificationJob / person
Recruitment / selectionPositive / negative
Projective testsTAT, Rorschach
Reliability / validityConsistency / accuracy
TNA (McGehee and Thayer, 1961)Organisation, task, person
Kirkpatrick (1959)Reaction, learning, behaviour, results; Phillips adds ROI
Succession planningKey positions; nine-box grid; ready-now successors
ScheinCareer anchors

Key Takeaways

What’s Next